Pylon Wiper Blades - 18 inch Review

Average Reviews:

(More customer reviews)If you're looking at these blades, you probably are doing so for the same reason I did: they're dirt cheap. However, let me save you some money, frustration, and possibly keep you a bit safer -- these are rubbish. Plain and simple, these blades are bad. If I was ambitious, I'd do a video review and show how horrendous these really are in action, but, to be honest, I'm just not that ambitious feeling right now.
Their first test came after a snow storm, following a semi, which was kicking up large amounts of spray thanks to the snow and ice being melted by salt on the road. Those of you who live in northern climates know what a nasty, hard to see through film salt spray from roads leaves on your windshield. Well, these wipers hardly cleared a thing. I had to pull over and clean it by hand with snow from the ditch more than once.
Fast forward a couple weeks. A rare December RAIN storm comes (usually any precipitation in December is snow up here). Perhaps these blades are just not build for tough winters, but at least they should handle rain, right? WRONG. Although better than the salt spray, to say these did a decent job would be a gross exaggeration.
Finally on my way to work one morning there was a slight film of the aforementioned salt spray. I hit my wipers and washer fluid to clean it up, and... nothing. It's as if somehow the blades levitate OVER my now sprayed windshield? The top of the arc on the passenger side did clear about an inch of fluid, but that is utterly worthless to me, the driver.
So I swung into Wal-Mart and got a new set of blades of a different brand, which work exponentially better. The moral of the story, spend a few dollars more, save yourself money and time in the long run.

Click Here to see more reviews about: Pylon Wiper Blades - 18 inch

You are viewing Pylon Wiper Blades -18 inch .As low as $1.99 Each When You Buy 10 of a size. Pylon Premium Plus The Pylon Premium Plus blade features a steel frame, poly thermal secondaries and steel tertiaries. This eliminates metal to metal contact, ensuring quieter blade action and rust problems. The custom molded rubber insert has stainless steel flexors for optimum blade to windshield contact. Note: Wiper blades are sold individually

Buy cheap Pylon Wiper Blades - 18 inch now.

FIAMM 72012 12 V Low Note / One & Two Term / Universal Bracket Review

Average Reviews:

(More customer reviews)I replaced the non functional horns on my 88 Porsche 944 and they work very well. The connectors were not identical to the OEM but the spade lugs fit well and securely. The OEM rubber boot has nowhere to connect on the horn body to weatherproof the connection.

Click Here to see more reviews about: FIAMM 72012 12 V Low Note / One & Two Term / Universal Bracket

The AM-80S Low note is new; designed to provide a lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M. specifications for a wide range of vehicle applications.

Get 30% OFF

Buy cheap FIAMM 72012 12 V Low Note / One & Two Term / Universal Bracket now.

ACDelco E1903E Horn Assembly Review

Average Reviews:

(More customer reviews)Great Replacement horn for my 2000 Ford Ranger. Original location is behind the fender well on the drivers side. I mounted the new one in front of the radiator by the drivers side headlight. Good sounding horn. Will work for what I need it to do, which is stop the old lady from backing into me in a parking lot!

Click Here to see more reviews about: ACDelco E1903E Horn Assembly

AC Delco Horn Assembly is engineered to meet all the high standards set by the industry. It is known for its quality, performance and dependability and provides long, maintenance free life. This unit is put through a variety of tests under extreme and unusual conditions to ensure high quality and dependability.

Get 56% OFF

Buy cheap ACDelco E1903E Horn Assembly now.

FIAMM 72102 12 V High Note One & Two Term. / Universal Bracket Review

Average Reviews:

(More customer reviews)These things are awesome. I bought two along with some relays and relay sockets so I could get them enough power directly from the battery to do serious audible damage. Make sure to buy this one with its mate, the 72112 low tone. After wiring in the relays, these went in my 2000 Civic perfectly. They replaced the crappy horn in there, and I used the wiring to tie into the relay signal hot wire. Then, I grounded the relay to the body by tying it into the ground wire from one of the horns. The horns come with these little wire slide connectors that you can clamp onto your wires. I used wire nuts to tie all the wires together - I suggest you do the same. I was able to mount them facing away from eachother with grounding connectors in between the mounts using a single bolt that held the old Honda horn. This was ideal, and very clean - no drilling required!
I suggest finding yourself a 12V DC 4-pin or 5-pin 40 Amp SPST ISO Micro Relay for this project. Also, it really helps to have a 5-Pin Wire Harness Relay Socket. This will give you all the wires you need directly from the relay. These are really cheap items, and you shouldn't have trouble finding them. The 4-pin relays work fine with the 5-pin sockets. Then, educate yourself on how relays work, and wire that bad boy up! I got my relay and relay socket on ebay.
Overall, I'm very pleased with this product. Buy it now if you want to be heard on the highway.

Click Here to see more reviews about: FIAMM 72102 12 V High Note One & Two Term. / Universal Bracket

The Freeway Blaster high note Horn is designed for addition to, or replacing, the original equipment horn(s) to alert drivers in noisy and high speed traffic. Versatility and rugged construction are major selling points of this horn.

Get 37% OFF

Buy cheap FIAMM 72102 12 V High Note One & Two Term. / Universal Bracket now.

FIAMM 72112 Freeway Blaster Horn Review

Average Reviews:

(More customer reviews)While I really like the FIAMM Freeway Blaster, the description is pretty misleading. The horn gets 5 stars, the ad one, averages to three. One of the descriptions writes "high or low tone (one or two terminals)" That's totally wrong. The 72112 is only the low tone. If you want the high tone you need the 72102. When they write one or two terminals, that has nothing to do with the high or low tone. And since you can't return this item, I'm stuck. I bought four, two for each of my bikes. Now I have to re-order two 72102's - there goes the free shipping. One other point says "Universal or right angle bracket". Really it's one bracket - you can bend it if you like.

Click Here to see more reviews about: FIAMM 72112 Freeway Blaster Horn

The Freeway Blaster low note Horn is designed for addition to, or replacing, the original equipment horn(s) to alert drivers in noisy and high speed traffic. Versatility and rugged construction are major selling points of this horn. Features steel housing and plastic projector. Copper wire coil motor. Available with universal mounting bracket or right angle bracket. Corrosion resistant finish. Each horn is tested to assure maximum performance. High or low not (one or two terminals). Can be mounted singly or as duals.130 dB

Get 32% OFF

Buy cheap FIAMM 72112 Freeway Blaster Horn now.